CHIP BASED AIR PRESSURE ALARM LOCK
Anti-Theft Is Now So Sophisticated

1. The first Air Pressure Detection Alarm Lock without key cylinder in the industry!
2. Patented design without a key cylinder- totally frustrating the burglar effort.
3. Integrated Chip Active Remote lock-opener and receiver. 2 in 1 design with high power-saving design!
4. Featuring the latest 128-bit Symmetry calculation technology in the US and is unable to be deciphered by traditional technologies. Almost impregnable!
5. When there is continuous detection from external forces affect the lock (Eg. being knocked on or towed), the anti-theft system will be immediately activated. The lock will emit an alarm of 130 dB within 8 seconds and at the same time, sending an alert message and warning alarm to the receiver within a radius of 0-2,000 m, (varies according to the interference and obstruction of the environment) displaying the condition of the car and informing the owner of the abnormality.
6. Enhanced detection function that reduces false alarms. Vibrations caused by passing-by heavy vehicles will not effect an alert to the owner. Only when there is continuous detection, which means a genuine abnormality, an alert will be sent.
7. Low-battery warning: When the battery is wearing out in the car lock, it will beep 5 times after locking, and then will unlock by its own. This will notify the owner to change the battery.
8. Siren device is heat resistant. It can operate in the car temperature of 40oC~+80oC. It is also high voltage resistant and able to withstand an electrical shock of 200,000 volts.
9. Body: The main bar has been hardened via high heat treatment and difficult to be sawed. There are more than 3 billion combinations of codes to prevent repetition of false alarm. It uses 3 1.5V AA alkaline batteries.
10. Receiver (Chip Active Remote): Approx. 5,000,000 combinations of codes to prevent repetition of false alarm. It uses one 1.5V AAA alkaline battery.

    * Patented Worldwide